G & J Steel & Tubing, Inc. can perform a wide variety of stamping operations including different slot patterns, flattening, ovalizing, notching, dimpling, tabbing, etc.
Stamping & Laser Tube Cutting
STAMPING & LASER CUTTING SPECIFICATIONS
| Laser Services | Holes Punched Notch End Form Slots Formed |
|
| Hole Diameter | 0.008 Inch and up | |
| Outside Diameter | 0.010 to 3.000 Inch | |
| Wall Thickness | 0.004 to 0.125 Inch | |
| Workable Materials | Aluminum Brass Carbon Steel Copper Cu Ni | Kovar Nickel & Ni Alloys Rodar Stainless Steel Titanium |
| Workpiece Type | Any length or configuration | |
| Tolerance | ± .005 Standard Tighter tolerance available upon request |
|
| Production Rate | 60 to 1000 Pieces per Hour | |
| Production Rate Variables | Length of part, location, and manufacturing method determine production rates. | |
| Cleanliness | Parts cleaned as required based upon hole manufacturing method | |
| Workpiece Length | Any required length | |
| Comment | Based upon the drawing our engineering department will recommend the appropriate method of hole manufacturing | |
| Equipment | Drill presses with single or multiple head drill fixtures Hydraulic punch presses Pneumatic punch presses |
|
| Industries Served | Aerospace & Aircraft Air Compressor Air Conditioner Automotive Beverage Electronics | Engine Gas & Appliance Heat Exchanger OEM Utility (Power/Sewer/Water) |
| Quality Assurance | Cpk 1.67 – 2.0 | |
Get In Touch
G & J Steel accepts your challenge to solve ANY metal tubing problem. Email us drawing and we will get back to you with a quote.
Contact Us Request a Quote